EESIMIX ships its mixers on a worldwide basis to end users or OEMS. Contact
us for technical details and a prompt offer on your application
EESIMIX is an original manufacturer of highest quality static mixers for
the oil and gas industry, chemical and marine applications and offshore
applications. We specialize in applications which involve crude oil mixing
and fiscal transfer applications to establish fluid quality. Examples
may include desalting or the determination of water content in pipelines,
, diluting and mixing of additives into liquids such as gasoline or fuel
oil or simply adjusting the viscosity of heavy fuel with gas oil. Static
mixers are also important for any application that requires mixing of
two or more fluids in the same stream.
Fig 1.0 Typical Example of a static mixer application .Bottom Water in
Crude Oil . A typical application mixing crude and water into a homogeneous
mixture
A small amount of energy is required to adequately mix oil and water in
a pipeline using conventional shear, reverse flow and collision to produce
a homogeneous mixture of water droplets and oil droplets downstream of the
mixing element with minimal net pressure drop. Static mixers have no moving
parts and are virtually maintenance free. Using the energy available from
the fluid in the pipeline and calculating the number of elements required
for mixing enables clients to achieve truly mixed liquids at the mixer’s
outlet.
An example of a typical application could include custody transfer mixing
.It is a well known fact for example, that static mixers are an absolute
requirement for crude oil sampling. The same applies to water cut measurements
in large pipes, irrespective of the technology involved one of the main
problems is density differences between oil and water. This problem manifests
itself in bottom water flowing at the base of the pipe. Although a inline
permittivity measuring device may measure the complete annulus of liquid
in the spool piece used, slugging, particularly at low flow rates can
cause severe separation of oil and water which cause errors in sampling
and measuring instruments since the sampling or watercut analyzing is
non representative without mixing.
The EESIMIX inline mixer are supplied in sizes 1 inch to 48 inches and
in pressure ratings from 150 ANSI to 2500 ANSI. The mixers can be fabricated
in carbon steel, stainless steel or Duplex. Each unit is factory pressure
tested and weld inspected to conform to international standards. Each
mixer is designed and manufactured to meet the task required by the application
. Mixers can be supplied with optional ports and connections , bypass
loops , grab samplers , watercut meters or specific analytical instrumentation.
EESIMIX ships its mixers on a worldwide basis to end users or OEMS.
Contact us for technical details and a prompt offer on your application
EESIMIX
60 Kaki Bukit Place #02-19 Eunos TechPark Singapore, SG 415979 Singapore
Telephone: +65-6748 6911 Fax: +65-6748 6912
Email : sales@eesimix.com
